Thursday, July 03, 2008

Film on a budget

I have done a lot of Adobe Flash animations of television graphics from the 50s, 60s, 70s and 80s. I have also just bought a copy of Adobe Premiere Elements 4.0, so I can experiment with video editing. I am really happy with Premiere Elements. In fact, there is only one thing I cannot do with it: make my graphics look like they are on film.



Stuart Kettle's Starting Science robot, which I created from scratch in Flash, then filmised in VirtualDub. Click on it for a better look.

Television graphics in the 70s were often broadcast from 16mm colour film. Graphics on film have a special “look”:

  • colours change

  • edges become softer

  • you may see dust or scratches

  • the picture may bob up and down or look grainy

Input video from Flash (encoded with Huffyuv) on the left, VirtualDub output on the right. Using VirtualDub filters means I can work with colours which are not "video safe" or sharp edges in Flash and not worry about how they will look.

If you want to make video look like old film, there are expensive plug-ins available that do a fantastic job. I can’t afford them, and I don’t like using cracked software. Most video editing programs come with a free old film plug in. I tried Adobe Premiere Elements’ free “Old Film” plug-in. It was rubbish! So I needed to find another way - one that was cheap.

Before you start, you need some video. To get animations out of Flash and into a video format I use a codec called “HuffyUV” - it’s a free lossless video compression codec. After you install it, you can export an avi from Flash using the “Export Movie” option in the File menu and select HuffyUV as the codec.

Don't forget to make sure the Flash Files are 720 x 576 at 25fps for PAL. I do my animations in a symbol that is 788 x 576 for PAL 4:3 or 1050 x 576 for PAL 16:9. I then squash the animations on the main stage for export horizontally to 720 x 576.

To get video out of Premiere Elements 4.0 to filmise it I also use HuffYUV. The DV format that Adobe suggests you use to export video you want to put back into Premiere Elements is no good for this job. It is very compact, but it will cause all sorts of nasty colour bleeding and make your end result look like a nasty VHS recording done somewhere with poor reception. To export a video as an .avi with HuffYUV from Premiere Elements you need to use "Export" from the File menu. Don't forget to tweak the settings to export "Progressive" - you don't need fields for film stuff!

Now we have some video we can filmise it. On the internet I found something called the MSU Old Cinema filter for a program called VirtualDub. I had never heard of either before, but I think they are both fantastic. Here's what I do with them.

In the MSU Old Cinema filter, I always start by selecting the “Modern video with yellow shift” preset, and then clicking on “Advanced”. This lets me play with all the filter’s settings.

In the “Settings” group I always uncheck all the boxes apart from “Show Noise” and “Random Noise On Screen”. This will give you “speckle” and “sparkle”. “Speckle” are bits of dirt on the film, which appear as black dots. In the 1970s film was broadcast that was covered in dirt! If the dirt was on the negative, then it would appear white on screen - this is “sparkle”. I never touch any other filter setting now apart from the Colour Correction.

I have a lot of off-air recordings of television from the 1970s. I have found the 16mm film on them suffered from something called “Yellow Shift”. This means that blue has faded much more than red and green, so you end up with slightly yellowy look with greyish blues. However, I have found the “Yellow Shift” Colour correction in the MSU Old Cinema filter doesn’t get this look quite right. In particular, it gets pinks wrong.

That means I usually use “Manual Linear” colour correction instead, and play with the colour sliders myself. To match the appearance of a 1979 print of the ATV colour zoom ident, I found Strength 60%, Red 186, Green 186, Blue 126 worked fine.

To get the look of a 1980 edition of ATV's “Starting Science” then I found Strength 60%, Red, 102, Green 114, Blue 30 worked, but I needed the VirtualDub built-in Brightness and Contrast Filter too. I set the Brightness to +7 and left the Contrast at 100%.

For a really faded look, to match a 1975 edition of Granada's “A Place To Live”, I found Strength 80%, Red 171, Green 107, Blue 42 worked well.

If the yellow cast is too strong or your footage looks too dark with these colour corrections you can reduce the Strength setting.

To make the film look “grainy”, I use another free VirtualDub filter. It’s called the MSU Noise Generator. Normal Distributed Noise with Y strength 3, Cb strength 3 and Cr strength 3 is a good start, but noise varies a lot from film to film.

If you add noise it not only makes your end result look more realistic - it can also hide defects in your source material. It is particularly good for breaking up gradient fills, which often look bad on video.

Film has softer edges than video, so it is important to soften the edges of anything you want to sell as film. To soften the edges I use the VirtualDub built-in “blur”” filter. However, you must make sure this appears before the other filters, so you don’t blur the grain or scratches.

If you are working in PAL 16:9, you can right click on the video input and output panes in VirtualDub to change view them at the correct aspect ratio.

To export the video from VirtualDub, I also use HuffyUV. If you press Ctrl-P you’ll be able to change the video compression method.

So we’ve got the grain, we've got the softness, we’ve got the faded colour and the speckle and sparkle and the scratches. All that’s left is the gate weave.

Gate weave is the gentle bobbing up and down that film used to do. The MSU Old Cinema filter and the Elements Old Film plug in both really overdo this effect. However, there is a way of getting a realistic gate weave effect. To do this I use the “Active Camera” plug in that comes with Premiere Elements 4. If you add this effect to a piece of video, changing the settings to Horizontal .33, Vertical 2.0, Crop 5, Rate 50, Jitter 75 is a good starting point.

The MSU Old Cinema filter is not a perfect solution - the number of speckle and sparkle artifacts it has is limited and they look rather small on screen. It cannot do things like "hair" trapped in the gate. And I have to add the marker that shows the film is coming to the end of a reel in Flash. It would also be good if there were adjustable settings for gate weave and flicker.

The MSU Noise Generation filter does not make a totally convincing film grain either - MSU have written a proper Film noise plug but it's for its paying customers only.

However, this is the best "free" filmising solution I have found, and it can produce some very realistic results. Try it yourself!

3 comments:

wbhist said...

Part of it was the film sources as you said, but it was also in some respects the telecine equipment used. In Britain Rank Cintels were the order of the day, but in the U.S. individual TV stations' telecines varied wildly: some used equipment from RCA (among the widely used film chain cameras from that company were three-tube TK-26's in the 1950's, four-tube TK-27's in the '60's and three-tube TK-28's in the '80's) while other stations went with General Electric (chiefly the PE-24 if before 1965 or PE-240 from 1966 to 1970, or finally PE-245; all four-tubes). Some American viewers noted that pictures elicited from TK-27's looked washed out compared with the picture as emanated from either TK-26's (or even later TK-28's) or the GE cameras. Oftentimes, a worn-out vidicon tube or tubes had an effect on the way film or slides were presented on screen. In short, a combination of the two - telecine equipment and faded film/slides.

Unknown said...

Many thanks for your comment, which I found very interesting. You're obviously an expert so please excuse my rather naive ramblings!

I've recently been talking to Roddy Buxton, who tells me that ATV Birmingham in their black/white era (pre Oct 69) used to use an in-house modified 35mm cinema projector as their telecine facilities.

At the other extreme there was TWW in Cardiff who were already using an early form of wet-gate telecine in conjunction with their Rank Cintels in the 1960s.

In additon to the Rank Cintels there were the Polygon(Mechau variable speed shutterless) telecines used at the BBC which gave lovely murky looking pictures in the 70s.

wbhist said...

I was talking about the cameras in the film chains. As for film projectors, there was RCA TP-66 and other machines made by companies like Simplex and Eastman. The way they interpolated picture images from films (especially the pulldown from 30 to 24 in NTSC systems) seemed to differ somewhat but their guiding principles were the same.